POWER SUPPLIES

Unlock the potential of your components:

When power supply noise is removed, you will see and hear higher contrasts and more low-level detail than ever before. The background gets darker, the space gets more transparent, dynamic range increases, articulation improves, and frequency response expands. Layers of subtlety and nuance are revealed. MOJO have two Power Supplies - the WATT v1.0 and the JOULE v5.0

WATT v1.0 POWER SUPPLY

The Watt is our new smaller, lower-current, lower-cost power supply with the same ultralow-noise performance as our award-winning Joule v5.0 power supply.

An ideal replacement for power supplies on:

  • Music-streaming devices
  • External single 3.5" or dual 2.5" drives
  • Intel NUC, Gigabyte Brix, and Zotac ZBox
  • DACs, ADCs, DAWs and other digital converters
  • XBox, Wii, Play Station and other gaming consoles
  • Routers, switches, and other network devices
  • USB buss power, USB to SPDIF, and USB to I2S converters
  • Solid state headphone amps, phono stages, and cross-overs

A plug-and-play upgrade for components with wall wart type external power supplies. MOJO also make custom DC power cables with an assortment of DC plugs to fit any specification. 

To power multiple components we offer an optional dual DC power cables for multiple components with up to 3.5A of continuous power.

 

Features and Specifications:

  • Less noise than a LiO4 battery.
  • Less than 50uV of peak-to-peak noise/ripple.
  • Less than 10uS settling time from zero to full output.
  • Up to 3.5 amps continuous power with up to 7 amp peaks.
  • Hot parts are heat sunk to the exterior allowing heat to dissipate through the entire chassis.
  • Sophisticated AC filtering, so that no special power conditioners are required.
  • Cascaded spread spectrum capacitive filtering for expanded bandwidth.
  • DC ground lift option allows separating AC and DC grounding.
  • Factory convertible from 115V to 230V AC input.

 

Only the highest-quality parts:

  • Belleson ultralow-noise high-dynamic regulators
  • Organic polymer capacitors with ESR as low as 7mOhms
  • High-frequency MLCC capacitors to filter beyond 3GHz
  • Ultrafast soft recovery Hexfred diode bridge
  • Laboratory grade filtered AC power inlet
  • Thermistor AC input overload protection
  • Neutrik silver-plated 10A + 10A XLR DC power outlets
  • Ultra­-heavy gauge extruded all-aluminum chassis
  • Sorbothane or Stillpoints anti-resonant feet

 

JOULE v5.0 POWER SUPPLY

The Joule v5.0 is a plug-and-play upgrade for components with wall wart or brick type external power supplies. We make custom DC power cables in normal and high-current configurations to fit any specification. To power multiple components we offer an optional second regulated power output and dual DC power cables with up to 10A of continuous power.

The JOULE v5.0 is an ideal replacement for power supplies on:

  • Mac Minis of all ages
  • Music-streaming devices
  • CAPS Zuma music servers
  • Pico-ITX type HTPC computers
  • External drives, NAS, and RAID arrays
  • Intel NUC, Gigabyte Brix, and Zotac ZBox
  • DACs, ADCs, DAWs and other digital converters
  • XBox, Wii, Play Station and other gaming consoles
  • Naim, Wired4Sound, Baetis, and other servers.
  • Routers, switches, and other network devices
  • USB to SPDIF and USB to I2S converters
  • Headphone amps and phono stages

Features and Specifications:

  • Less noise than a LiO4 battery.
  • Less than 50uV of peak-to-peak noise/ripple.
  • Less than 10uS settling time from zero to full output.
  • Up to 7 amps continuous power with up to 10 amp peaks.
  • Hot parts are heat sunk to the exterior allowing heat to dissipate through the entire chassis.
  • Sophisticated AC filtering, so that no special power conditioners are required.
  • Cascaded spread spectrum capacitive filtering for expanded bandwidth.
  • DC ground lift option allows separating AC and DC grounding.
  • Easily converted from 115V to 230V AC at IEC inlet.

 

We use only the highest-quality parts:

  • Belleson ultralow-noise high-dynamic regulators.
  • Organic polymer capacitors with ESR as low as 7mOhms.
  • High-frequency MLCC capacitors to filter beyond 3GHz.
  • IXYS ultrafast soft recovery Hexfred diode bridge.
  • Laboratory grade filtered/fused/switched AC power inlet.
  • Neutrik silver-plated 10A + 10A XLR DC power outlets.
  • Ultra­-heavy gauge .125" thick all-aluminum chassis.
  • All non-magnetic stainless steel PEMs and hardware.
  • Durable high-temp powder coating inside and out.
  • Sorbothane or Stillpoints anti-resonant feet.

>Contact us for purchase information or if you would like to experience any of our products in person.

MOJO AUDIO